Swarovski 9030 CG 610 (A+B) Two Component Epoxy Resin Glue, 50ML Cartridge
厂商:
SWAROVSKI
分组型号:
SW9030/301
库存:
联系我们

CG 610-240 (A+B)
The CG 610-240 two-component epoxy resin glue was specially developed for gluing Swarovski crystals of very small sizes, starting with PP 0. Depending on the area of application the adhesive can be used for crystals up to the size of PP 14.

Key Features:
  • Suitable for gluing very small crystals (starting with size PP 0)
  • Low viscosity allows an easier dosing of small glue quantities
  • Cost saving due to long pot life (140 min.)

    Technical Data:
    Mixing ratio (A : B) - 2 : 1 (resin : hardener) by weight
    Pot life at room temperature (23°C/73.4°F) – quantity applied: 1 g - 140 min.
    Complete curing time at room temperature (23°C/73.4°F) - 72 h our
    Complete curing time in oven (40°C/104°F) - 12 hour
    Complete curing time in oven (70°C/158°F) - 4 h our
    Complete curing time in oven (100°C/212°F) - 1.5 hour
    Handling time at room temperature (23°C/73.4°F) - 16 hour
    Elasticity (break extension at 23°C/73.4°F) - 46.5%
    Viscosity, mixed (23°C/73.4°F) - 1.750 +/- 250 mPa*s

    The 50 g cartridge of CG 610-240 is designed in a way that the containing resin and harder do not have to be mixed together by the user. Just attach a dispensing gun and the dispensing tip (delivered with the 50 g adhesive package) to the cartridge and start gluing.


  • 数量:


    数量






    信息和价格如有变更,恕不另行通知。 版权2006-2024 Allium Blue Co. 版权所有不得转载。 商标只用於本网站以标签各制造商的产品。